With an LCT installed the Fiery hangs up and will not complete booting
- 13 Years Ago
- Rob Bussell
- Fiery
August, 2008
Models: MX5500N / 6200N / 6201N / 7000N / 7001N
Subject: With an LCT (Large Capacity Tray) installed the Fiery hangs up and will not complete booting.
Symptom: With an LCT installed the Fiery hangs up and will not complete booting, hangs up at please wait. Remove the LCT the machine boots up normally.
Cause: Fiery patch installation sequence.
Solution: If the patch sequence is missing or installing patch in the wrong order the machine will not complete the boot process.
Also In This Category
On a scale of 1-5, please rate the helpfulness of this article
Optionally provide private feedback to help us improve this article...
Thank you for your feedback!
Last Modified: 13 Years Ago
Last Modified By: Rob Bussell
Type: FIX
Level: Expert
Article not rated yet.
Article has been viewed 940 times.