Les Olson Company Knowledge Base

Sharp FO-DC Series All Image and Memory Clear

Rob Bussell
Standalone Fax

 March 24, 2010

Warning: Read the procedure carefully especially if selecting option 1 (wipes everything out and restores the machine back to factory defaults).

Power the FO-DC series fax machine off, Hold the Start & Stop buttons (at the same time) while powering the FO-DC series back on. Continue holding the Start/Stop buttons down until Display comes up. 3 options will appear in the display.  Option 1 memory clears the machine back to factory defaults (warning: You will lose all settings including, rapid dials, programmed numbers, network settings, scan settings, etc). Option 2 only clears the image memory (Recommended if you get blank page print outs or the same print out over and over). Option 3 cancels the memory clear procedure.

Please call Les Olson Company at 801-486-7431 and ask for the Fax shop if you have any questions or concerns.

Also In This Category

On a scale of 1-5, please rate the helpfulness of this article

Not Helpful
Very Helpful
Optionally provide private feedback to help us improve this article...

Thank you for your feedback!

Comments require login or registration.

Still have questions - Submit a new ticket
Last Modified: 10 Years Ago
Last Modified By: Rob Bussell
Type: FIX
Level: Intermediate
Article not rated yet.
Article has been viewed 1.5K times.